tracking pixel

Safagrass 1.5m x 1.0m Rubber Grass Mats Playground Safety Surfacing Tested To EN1177

Be the first to review this product

Commercially tested to EN1177 our 1m x 1.5m x 23mm thick c/w pegs and ties to provide a CFH of 3.00m depending on soil conditions. 

Product Code: SG1
£27.60 Incl. Tax £23.00 Excl. Tax
  • Buy 30 for £20.00 (£24.00 incl. tax) each and save 14%
  • Buy 50 for £18.00 (£21.60 incl. tax) each and save 22%

Availability: In stock

Deliveries Right on Time

Deliveries ‘Right on Time’


Online Playgrounds can deliver the quality parts you need, at a time you need them throughout the world.


Consignments big or small; we work closely with our logistic partners to provide fast deliveries wherever you are and on time.


read more



Safagrass matting is an environmentally friendly, non-slip, impact absorbing safety and footway surface. Its ideal for fitness / trim  trails, cableways, multi-function play frames, springers, swings and pathways and can easily be self installed.

Installation Instructions:

  1. Mark out the area to be covered by Safagrass. Mats can be laid directly on to existing grassed areas. The area should be filled in if uneven with topsoil and be compacted.
  2. If topsoil has been used to level area, sow grass over this area. Leave about 150mm in from the outside edges.
  3. Now lay out the Safagrass mats over the area to be covered, cutting around any equipment or obstacles if necessary and fasten edges together using cable ties, then trim to suit.
  4. Cut into the ground about 75mm deep along the outside edge of the perimeter area to be covered using a grass edge cutter or similar.
  5. Roll back the Safagrass mat and starting about 150mm in from the outside edge of the mats, use a spade and cut the top turf away in the direction of the 75mm deep cut finishing at the depth. This will leave a wedge shape channel. Continue around the perimeter of the laid mats.
  6. Roll the Safagrass mat back and down into the channel and if the surface is hard, make a pilot hole prior to inserting pegs. Peg the edge through the large holes in the mat and into the ground. Use 3 pegs per mat. You should now have a ramp edge all the away around. Now cover the ramped area with topsoil and seed. Bring the level back up to it’s original level and flatten into the existing ground.

Additional Info

Additional Info

Product Code SG1
Weight 100.0000
Country of Manufacture


Write Your Own Review

You're reviewing: Safagrass 1.5m x 1.0m Rubber Grass Mats Playground Safety Surfacing Tested To EN1177

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars

You may also be interested in the following product(s)