Description
Details
The rock holds are suitable for both new installations / repairs and are very easy to fit. Supplied fixings are for timber.
Fixing to wood: (fixings included)
- Step One - Drill a straight 13mm hole into the wood
- Step Two - Hammer a T Nut into the back of the wood (available in our hardware section)
- Step Three - Repeat steps one and two in order to create a good number of holes for placing your holds
- Step Four - Secure the wood to the wall and bolt your holds on
Fixing to Brick: (Additional Ragbolts are required for this)
- Step One - Drill a straight 12mm x 40mm hole into a solid wall
- Step Two - Hammer the expansion socket into place, flush with the wall
- Step Three - Firmly hit the centre of the socket a number of times to make it expand Step Four - Fix the hold to the socket ensuring that it is unable to move or pull out. Note - you may have a number of different length bolts (longer bolts for deeper holds and shorter bolts for shallower holds)
Additional Info
Additional Info
| Product Code | Climbing Wall Stones |
|---|---|
| Weight | 1.8000 |
| Country of Manufacture |
