Swings

8mm sheradized traditional swing chains with 1 large connecting link, size stated is Frame Height, compliant with EN1176 standard.

Sheradized anti-wrap swing chains, Size stated is Frame Height, compliant with EN1176 standard.Anti-wrap chains feature a solid steel bar midway of the suspension to prevent the chains being wrapped over the top swing bar.

8mm Sheradised traditional commercial swing chains with 3 large connecting links, size stated is Frame Height, compliant with EN1176 standard.

8mm Sheradised keylink adjustable swing chains, size stated is Frame Height. compliant with EN1176 standard.

Replacement connecting links for Keylink swing chains.

6mm short link stainless steel (AISI 304) swing chain - EN1176 compliant.

TUV Tested to EN1176 - Premium Large black flat swing seat with aluminium insert (430mm x 220mm x 40mm)

TUV Tested to EN1176 - Small black swing seat with aluminium insert. 440mm x 180mm x 40mm.

TUV tested basic eccomony rubber swing seat. Manufactured from EPDM rubber with an aluminium insert.

640mm x 150mm x wrap around seat consisting of 8mm thick rubber.

TUV Tested to EN1176 - Toddler cradle seat complete with intergrated fixings suitable for 6mm and 8mm chain. Chains not included.

Wicksteed Cradle Seat (5901-048).

Sutcliffe Pod Seat suitable for 6mm Chains

This bar is manufactured from partially covered stainless steel tube complete with fully enclosed chain housing and is suitable for 5mm and 6mm chains.

Stainless steel swing hangers mounted on a rubber tyre with galvanised support washers.

TUV Tested to EN1176 -1m Diameter 2 point suspension group swing seat manufactured from a steel ring with cushioning membrane covered with 16mm steel core combination rope.

TUV Tested to EN1176 -1.2m Diameter 4 point suspension group swing seat manufactured from a steel ring with cushioning membrane covered with 16mm steel core combination rope.

The inclusive seat is supplied with chains fixed in an upright position to suit any 2.4m (8ft) swing frame.

Stainless steel suspension bracket suitable for tyre swing seats. Sold per hanger.

Replacement chain connector suitable for Primo Play premier cradle seat.

Replacement crutch strap suitable for Primo Play premier cradle seat.

M12 Swing hanger suitable for timber swings complete with shackle, bush and 140mm long attaching bolt. Swing hangers are sold individually - you will need 2 per set of chains

A heavy duty cast stainless swing mount which is suitable for both timber and steel beams. The fitting is suitable for either 6mm or 8mm swing chains. The hangers are sold individually - Two are required per set of chains

Complete cast swing fitting complete with bearing and M12 x 200mm connecting bolt. Chains connect directly into this fitting and is suitable for either 6mm or 8mm chains. Swing hangers are sold individually - you will need 2 per set of chains

Replacement swing hanger block suitable for either 50mm or 60mm diameter steel top beams.

Group swing bearing with safety chain, nipple for lubrication, ball and thrust bearings.

A stainless steel cast birds nest swing suspension and safety chain assembly complete with 140mm long M16 bolt.

Replacement brass bushes for use with swing sviwels to Wicksteed, SMP, Playdale and Record Swings. Others sizes also supplied. Use the drop down box and select the size required.

Quick repair links to be used for repairs to swing chains. Use the drop down box to select the size you require.

Stainless steel "C" link or split link suitable for repairing or joining chains.

Our range of range of shackles includes replacement shackles for Wicksteed, Record, SMP and Playdale Swings down to smaller 8mm and 6mm chain connector shackles. Use the drop down box to select the size required.

Heavy duty galvanised shackle complete with drilled bar to take two cotter pins. This type of shackle suits older Hunt, Hurst, Leavercrest and Wicksteed Swings. Use the drop down box to select the size required.